CLR 1337 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515

CLR 1730 / CLH 6372

Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372

CLR 1796 / CLH 6580

UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580

CLR 1876 / CLH 6631

Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631

CLR 3080 / CLH 6372

General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372

CLS 9600

High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600

CLS 9611

A low viscosity, single component, epoxy potting and encapsulating compound. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL 94-HB flammability requirements. Heat Cure Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. CLS 9611

CLS 9616

Heat Cure. Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. Low viscosity. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL94-HB flammability requirements. CLS 9616

XID 1681 / XHD 1652

A two component polyurethane casting system. Product has long pot-life and cures to a hardness of 65 Shore D. XID 1681 / XHD 1652

XRD 1014 / XHD 1015

High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

XRD 1018 / XHD 1019

1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019

XRD 1321 / CLH 5185

Machine dispense friendly, tough, casting epoxy system. Increased flexibility when compared to CLR 1831 family. A two component, low stress, heat cure epoxy system specifically developed for use on instrument and power transformers. The product if filled with non-abrasive fillers, making the product suitable for machine dispensing. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. XRD 1321 / CLH 5185

XRD 1347 / XHD 1348

The product cures to a shore hardness of 50 A, low viscosity, soft system. A two component, very flexible epoxy system. XRD 1347 / XHD 1348

XRD 1501 / CLH 6090

4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090

XRD 1575 / XH 61418

2:1 machine dispense adhesive. Bonding abrasive wheels and disks. A two component epoxy system suitable for potting, casting and adhesive applications. Product gels quickly and has good thermal cycling endurance. Material is filled with non-abrasive fillers making it suitable for machine dispensing. XRD 1575 / XH6 1418